Sorry for this dumb question. However, I'm completely new to the karaoke world and don't want to damage any of my newly invested hardware. I just bought below hardware. Could someone provide connection suggestion for these hardware to output the best performance?
PPB12 PPB12 Speakers
VX2000 VX2000 Amplifier
MX1204 Pro Audio 12 Channel MX1204 audio mixing
HACEMP2600 Acesonic UHF-2600 Dual UHF Wireless Mics (2) System
HVCPPL0668 Vocopro DVX-668 Karaoke Player
LCD TV
Thanks,
Boonie
Connecting Karaoke System
OK the short, down and dirty, in bullet statement form, here's the chain.
Player - Video - to your TV/Video Monitor (usually the yellow "Video In")
Player - Audio - to your mixer either Channels 5&6 or 7&8 (My standard is to always connect red to right channels and white to left channels but it's not necessary the reverse will work as well)
Mics - to your mixer mono channel (Either 1,2,3, or 4) (Personnally I work fro left to right)
Mixer - Mains - out to amplifier
Amplifier - out to each speaker
Hope this helps..., JR
Player - Video - to your TV/Video Monitor (usually the yellow "Video In")
Player - Audio - to your mixer either Channels 5&6 or 7&8 (My standard is to always connect red to right channels and white to left channels but it's not necessary the reverse will work as well)
Mics - to your mixer mono channel (Either 1,2,3, or 4) (Personnally I work fro left to right)
Mixer - Mains - out to amplifier
Amplifier - out to each speaker
Hope this helps..., JR
